Prusa 3D Printers Settings

 

You can use Opague, Dark, Zero and Wax DLP resins with Prusa SL1 3D Printer. Find below printing settings at 50 micron for this resins;

Please note that these settings are provided by customers who are using our resins with Pruse SL1 3D printers so that may cause discrepancies.

Thick Model Settings;

Opaque Resin
Exposure	15 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

Dark Resin
Exposure	20 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

 

Zero Resin
Exposure	20 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

Wax Resin
Exposure	15 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

 

 

Thin Model Settings;

Opaque Resin
Exposure	18 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

Dark Resin
Exposure	23 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

Zero Resin
Exposure	23 seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm

Wax Resin
Exposure	18seconds
Initial Exposure	100 seconds
Layer Height	0.05 mm