Please find below printing settings at 50 micron for Powerresins Dark resin;
Please note that these settings are provided by customers who are using our resins with Phrozen Sonic Mini 3D printers so that may cause discrepancies.
Dark Resin settings
| Layer Height | 0.05 mm |
| Bottom layer count | 8 |
| Exposure time | 17 second |
| Bottom exposure |
|
| Light off delay |
|
| Bottom light off delay |
|
| Bottom lift distance | 6 mm |
| Lifting distance | 5 mm |
| Bottom lift speed | 100 mm/min |
| Lifting speed | 100 mm/min |
| Retract speed | 200 mm/min |