We will provide some profiles for PowerDent Temp DLP resin, however you can adjust these parameters according to the type of print you are making or the Z layer thickness you wish to use.
Settings for 50 micron with PowerDent Temp resin
Below we share the setting that our customers are using for 50 micron with PowerDent Temp resin.
Slice Settings
| Layer Tickness(mm) | 0.05 |
| Normal Exposure Time (s) | 12.00 |
| Off time (s) | 1.00 |
| Bottom exposure Time (s) | 150.00 |
| Bottom Layers | 8 |
| Z Lift Distance (mm) | 6.00 |
|
|
3.00 |
|
|
3.00 |
| Anti-alias | 1 |
Machine Settings
| Resolution (pixels) | 1440 x 2560 |
| XY- Pixel size(um) | 47.25 |
| X Size(mm) | 68.04 |
|
|
120.96 |
|
|
165.00 |