You can use Opague, Dark, Zero and Wax DLP resins with Prusa SL1 3D Printer. Find below printing settings at 50 micron for this resins;
Please note that these settings are provided by customers who are using our resins with Pruse SL1 3D printers so that may cause discrepancies.
Thick Model Settings;
|
|
Exposure | 15 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Dark Resin | |
Exposure | 20 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Zero Resin | |
Exposure | 20 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Wax Resin | |
Exposure | 15 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Thin Model Settings;
Opaque Resin
|
|
Exposure | 18 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Dark Resin | |
Exposure | 23 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Zero Resin | |
Exposure | 23 seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |
Wax Resin | |
Exposure | 18seconds |
Initial Exposure | 100 seconds |
Layer Height | 0.05 mm |